Dincel Bushfire Building Expo
Published 17 September 2019
Great turn out at the Dincel Bushfire Building Expo in Springwood NSW.
Recent Articles
-
Eliminating the Risk of Air Voids in Concrete Walls
Published November 2024 -
Key Issues & Attributes To Consider When Selecting Dincel
Published September 2024 -
Does Thermal Image Scanning Detect Air Voids?
Published August 2024 -
Can Basement Mould Affect The Rest Of The Building?
Published July 2024 -
A Guide to NCC Fire Compliance
Published May 2024 -
Water Leaking At The Basement Wall
Published April 2024 -
Does Your Insurance Cover Leaking Walls And/Or Mould/Mildew?
Published March 2024 -
Your Engineer can eliminate the need for horizontal bars with Dincel
Published March 2024
Archive
Eliminating the Risk of Air Voids in Concrete WallsNovember 2024
Voids in concrete walls are a common challenge in the construction industry, presenting serious risks to a building’s structural integrity. If not addressed, these air pockets can result in various complications, including reduced load-bearing capacity and potential structural failure, making it crucial to understand the factors that contribute to their formation to tackle the issue effectively.
Key Issues & Attributes To Consider When Selecting DincelSeptember 2024
Permanent Polymer Formwork (PPF), such as Dincel, consists of a PVC shell which is filled with conventional or Self Compacting Concrete (SCC). PPF walls are different to conventional concrete walls such as precast or walls cast in-situ with removable formwork or masonry walls and have significant advantages over these conventional walling types, which will be discussed later in this paper.
Does Thermal Image Scanning Detect Air Voids?August 2024
Thermal Image cameras do not act as x-ray machines.Thermal imaging detects temperature at the surface of an object and displays on a screen different colours depending on temperature.
Can Basement Mould Affect The Rest Of The Building?July 2024
If you design a basement that is susceptible to mould, you are likely contributing to a building that is non-compliant with the National Construction Code’s mould and mildew regulations. This whitepaper discusses the issues surrounding basement mould and how recent studies and industry developments are impacting the design and specification of basement waterproofing solutions.
A Guide to NCC Fire ComplianceMay 2024
With fire regulations constantly evolving, fire compliance is critical for building professionals. It is thus timely to examine current fire compliance requirements, the methods to prove compliance with the National Construction Code (NCC), and how these issues relate to polymer formwork wall systems for internal and external walls.
Water Leaking At The Basement WallApril 2024
With rising urban densities, building height restrictions and owners looking to add value to their property, the inclusion of basements and other habitable below-ground spaces in new builds is quickly becoming common practice throughout Australia. Due to this trend, there is now a greater demand for effective waterproofing design and installation solutions that will ensure the success of projects for all parties involved.
Does Your Insurance Cover Leaking Walls And/Or Mould/Mildew?March 2024
As far as the insurance industry is concerned, a leaking wall and/or mould mildew are defects and are not covered by most of the building and PI insurance policies.
Your Engineer can eliminate the need for horizontal bars with DincelMarch 2024
When using Dincel, your engineer can eliminate the need for horizontal reo bars.
Does Your Building Comply With Mould/Mildew Requirements of NCC-2022 & NSW Water Management Act?January 2024
The health of building occupants can be affected if the internal surface of an external (façade and basement) wall demonstrates mould/mildew and fungus development. There are two conditions for these problems to emerge: (a) the presence of water vapour and (b) the availability of nutrients.
Beyond British Standard BS8102:2022December 2023
In the absence of an Australian Basement Code, building professionals defer to using the well-known British Basement Construction Code – BS8102:2022. Whilst a useful starting point, this code is inadequate in Australia as it does not take into account:
Celebrating a Dincel milestoneDecember 2023
Recently, we celebrated the official launch of our Dincel Structural Walling Waterproof System, following many years of research and development. A sincere thank you to all those who joined us for these celebrations. We look forward seeing many projects utilising this system in the coming months and well into the future, while celebrating more milestones for Dincel along the way.
A Q&A With Steve Darwell, Chief Operating Officer at Dincel Structural Walling.August 2023
A veteran within the industry, Steve recently sat down with us to discuss the Permanent Formwork Industry Council (PFIC), and how Dincel Structural Walling remains committed to solving the industry's permanent polymer formwork needs.
