Once we used Dincel we never looked back again. We will use Dincel in our future projects for core construction, blade columns, internal and external walls, basement walls and water/sewage tanks and stormwater pits. Dincel is a very flexible and versatile system even for curved shaped walls.

Matt Huttary

Project ManagerAlliance Project Group

We have found the product to be cost-effective, versatile, practical and fit for its intended purpose. We would not hesitate to encourage the use of the product on future projects and will actively promote the product to Structural designers and Architects.

Michael Musarra

Project ManagerA W Edwards

Key advantages over other walling systems including less cranage due to the lightweight nature of the panels, the speed of construction and the cost advantages in supply and installation.

D. O'Sullivan

General ManagerBKH Group

I highly recommend incorporating Dincel Construction System, particularly at the early architectural design stage in order to maximise the benefits. This can achieve the elimination of costly transfer slabs, reduction in excavation depths, possible elimination of shoring systems, better ramp grades, etc.

Charbel Barakat

Construction ManagerCeerose

I highly recommend using the Dincel Construction System in multi-level apartment construction as the time and cost savings cannot be compared to any other known methods in the construction industry.

Michael Owen

Project ManagerCHC Affordable Housing

We have come to appreciate the product's benefits in performance, being of light weight material manual handling injuries or risk of injuries are reduced, no stripping is required as per conventual formwork wall systems improving site logistics and housekeeping.

Michael Petracca

Project SupervisorDe Martin & Gasparini

We have taken advantage of utilising the Dincel load-bearing walling system, this combination provides maximum speed and efficiency in building construction and significant material cost savings. The product also reduces the potential risk of injuries.

Victor J Essey

Managing DirectorGondella

The Dincel system allows formwork placement to begin on Day 1 which takes vertical elements off critical path and reduces the cycle time. The Dincel system is not reliant on crane time which allows the crane to do the general lifting.

George Argyou

Construction DirectorHickory Group

We found the use of Dincel wall has resulted in major cost savings in our projects. Dincel further reduces builder's liability, your patented snap connection allows faster and safer erection method without having additional safety platform.

Steven Tambouras

DirectorMendri

110mm Dincel Walls were used to achieve a Fire Rating Level of 90/90/90 and Dincel Walls do not require horizontal reinforcement for crack control purposes.

Andrew Tetlow

Construction ManagerPinnacle

Significant cost effectiveness, major construction time savings and enhanced construction safety. The system is simple, flexible and practical enough to be installed by construction trades with minimum skill and training level.

Brett Granter

DirectorUltrafloor

These walls were installed without the need of waterproof membranes, scaffolding, horizontal wall reinforcement and joints in a very short space of time. We would not hesitate to encourage the use of the product on future projects.

Michael Kouknas

Project ManagerWatpac Construction NSW

Dincel was a great system to use on this project and the after-sales support team was extremely valuable especially when we placed our 7.5m high walls in a single pour.

Chris Pearce

OwnerJCP Construction & Development

Having successfully used Dincel in the past for the Maxon Group it was an easy decision to use the Dincel Structural Walling system once again. When your architect, without any prior consultation, also recommends the same system... it’s a testament to the envious credibility that Dincel enjoys within the building industry.

Andy Hu

Maxom Group

The content provided a great insight into understanding the installation requirements for your system, best practices and the consequences of poor installation. The engagement in discussing both technical and legislative aspects was constructive and the feedback on the information sessions from our team was positive.

Nathan Naidu

Team Leader, Inspection Services | Audit & InspectionsVictorian Building Authority

We used Dincel on one of our 3 storey unit developments in 2018 and we have never looked back. We now use Dincel on all retaining walls , fire separation walls, basement walls as well as sewage and retention tanks.

Mikat Constructions

We found the Dincel 275 to be the perfect solution for this substantial retaining wall, both for installation and product performance.

Clyde DaishHD Projects

The team at MBG were so impressed with the structural benefits of the Dincel wall, we also included it in the main access core (lift and stair) to achieve the necessary fire ratings required under the NCC, and furthermore extending the structural integrity into the columns

Stephen DeanMore Building Group

Dincel played a crucial role in bringing our vision to life, offering a product that could be seamlessly integrated with our design. It’s flexibility allowed us to maintain our vision’s integrity, unlike conventional methods that often force design compromises around materials.

Phillip StratiAesthetic Developments

With over 20 years full service installation experience, HD Projects turned to Dincel Structural Walling from a structural integrity, compliance and buildability point of view. An approximate 50% cost saving when compared to precast/tilt-up didn’t hurt, either

Clyde DaishHD Projects

As a builder how can I ensure a wall installer or formworker is installing Dincel correctly if I don’t know how to install it or what to look out for? After attending The Dincel Academy with my team we gained that knowledge and are now confident enough with this simple, fast and easy to use product to do all of the installation ourselves. If we need that extra little bit of help between our Account Manager and Dincel’s Quality Assurance team, we’re covered.

Charlie SemaanSemaan Pty Ltd

Dincel provided a solid backdrop for the external facade finishes, including a render system and batten screening, which helped create a striking and rhythmic facade that aligns with our architectural vision.

Dean Kensit

Oztal Architects

We were really impressed with the Dincel load-bearing walling system we used for the subfloor retaining walls. It made a huge difference in speeding up the construction process, allowing us to start placement early and cut down the overall build time, which also helped reduce material costs.

Kirby Roper

Kirby Architects